a1200 viper 040 freezes

odo · Newcomer Joined: 16 Jan 2009 Posts: 21

Hi i bought a viper 040 and now it freezes a lot you can't even move the mouse
I tried a differenet psu
an other cf card (classicwb)
I also have the flickerfixer mk2 but if i remove it the problems are the same

odo · Newcomer Joined: 16 Jan 2009 Posts: 21

It happens a lot when i click on a icon

Acid · Amiga Junkie Joined: 02 Nov 2010 Age: 36 Posts: 419

Make sure the ram is installed securely on the card and remove the card and put it back in it might just need re-seating. If it still freezes a lot try using the amiga for a while with the card in but no ram installed, that way you could find out one way or the other if the ram is at fault. If it isn't then you might have programs in workbench which cause the problems.

odo · Newcomer Joined: 16 Jan 2009 Posts: 21

Thanks
i tried a other a1200 and it works very good.Mybe a time fix ?

MIK UK · Posted: Sun Jun 17, 2012 3:11 am Post subject:

Might be the mother board revision of the A1200. I can't remember which one is the best... it sits in my A1200T I know that. Revision 1D4 I sort of remember as being the best compatible A1200 when it comes to all things hardware but don't quote me on that as I can't honestly remember. Printed on the mother board if I remember correct on all revisions.
Check or ask for more info. My memory sucks. Sorry! Crying or Very sad

Could also be that your board is touching the inside metal shielding just inside the trap door, bend it back flush.
_________________
A1200T, Apollo 1260, 32MB RAM, 3.1 ROMS, 4GB HD, Z4 Board, Picasso II, IOBlix (Serial/Parallel), Squirrel SCSI, 2X CD, IDE 100MB Zip Drive, OS - DOpus Magellan II. Plus an A500+ Yum.

desiv · Posted: Mon Jun 18, 2012 5:21 am Post subject:

I know with my A1200, both the Fast RAM card I had and my ACA1230 don't like to be plugged in all the way.
I have to plug it in all the way, and then edge one corner of the card back just a bit...

I'm thinking it's a bad connection.. I cleaned the connector, but might need to try again..

Did that with both the cards I tried.
But, with edging the card back just a smidge, it works great....

YMMV.. Wink

Good Luck..

desiv

motrucker · Posted: Sun Jun 24, 2012 7:06 pm Post subject:

It's amazing how many A1200's tend to short the accelerators with it's RF shielding. Bending up the lip on the RF shield will cure the problem. Or you can trim the bottom off with snips or a dremel tool.

odo · Newcomer Joined: 16 Jan 2009 Posts: 21

Hi all Sorry for the very long delay little bit sick
A friend of my is making the time fix and i bought a other 1200 and in this one the works very well BTW it''s no viper but an apollo 040 @44
At the moment i have 16mb in the card but i want 32mb.The problem is that double sided don''t fit in it I tried 2 32mb with 4 chips but those don''t work.

odo · Newcomer Joined: 16 Jan 2009 Posts: 21

Hi Question
nanya NT511740B5J-60 is this one 32mb or 64mb?