| View previous topic :: View next topic |
| Author |
Message |
Silverbird Newcomer
Joined: 27 Aug 2012 Posts: 5 Location: Australia
|
Posted: Mon Aug 27, 2012 12:08 pm Post subject: Sound problem. |
|
|
Hi all I only seem to have one problem with my winUAE and that's the sound when the game runs,it seems to play ok for a split second then seems to echo continuously.
I have windows XP with Pentium 4 and a Creative sound blaster card installed.
I have tried the sound tab and moved all the slide controls and pushed all the buttons I could but with no effect?
The only thing I have not tried was the Driver section (bottom left) could some one please help me.
Kind Regards. |
|
| Back to top |
|
 |
Oge_user Groupie in Training


Joined: 04 Feb 2010 Posts: 29 Location: Italy
|
Posted: Tue Aug 28, 2012 10:25 am Post subject: |
|
|
First of all, check which devices share the same IRQ of Sound Blaster.
Cheers,
Oge _________________
 |
|
| Back to top |
|
 |
markpjd Newcomer

Joined: 07 Aug 2012 Posts: 16
|
Posted: Thu Sep 06, 2012 9:57 pm Post subject: |
|
|
Hi,
Which version of WinUAE are you using? and does this happen in any other games you play in Windows!? _________________ Cheers,
Mark
Games Coffer
http://gamescoffer.markstechstop.co.uk |
|
| Back to top |
|
 |
Silverbird Newcomer
Joined: 27 Aug 2012 Posts: 5 Location: Australia
|
Posted: Sat Sep 08, 2012 10:47 am Post subject: |
|
|
Hi Mark the version that I have is 24.1.0 I use the Dos Box and C64 Emulators a fair bit and have no problems with them.
Thanks for the reply. |
|
| Back to top |
|
 |
Retroplay Amiga Enthusiast


Joined: 10 Oct 2005 Age: 38 Posts: 553 Location: Frederikshavn, Denmark
|
Posted: Sat Sep 08, 2012 10:58 am Post subject: |
|
|
Try using portaudio instead in directsound.
Download the portaudio library at winuae.net and place the .dll where winuae.exe is located.
Then select portaudio driver in the dropdown menu in WinUAE sound tab. _________________ RIP mom (1953-2008) |
|
| Back to top |
|
 |
Silverbird Newcomer
Joined: 27 Aug 2012 Posts: 5 Location: Australia
|
Posted: Sat Sep 08, 2012 10:29 pm Post subject: |
|
|
Thanks for the reply I will try the above and will get back to you with the results.
Kind Regards.
Ok I have done what you said but if I don't uncheck the port audio circle in the driver box before I quit the emulator when I load it but up I get an error message twice saying that "MSVCR100.dll was not found.
This was easily fixed thou but I have found that if I slide the "Sound buffer size" to the Max of ten then slide the floppy drive sound down to zero then go to quickstart tab and slide the CPU power down to low that seems to fix it.
Hope this makes sense to you as I have no clue myself lol.
Anyway any feed back would be received with thanks.
Kind Regards once again. |
|
| Back to top |
|
 |
|